This non-slip aerosol is for the re-application of the non-slip surface on windusrfing boards. Prepare the board by lightly sanding the existing surface with some 120 or 240 grade paper and remove dust using a cloth. Mask off all areas not required for non-slip application, i.e rails, footstraps and pads. Shake can well for a few minutes, then holding approximately 1 metre from board apply evenly in short bursts. If you require to build up a thicker layer, leave for a few hours and re-apply as necessary.
- Re-applies non-slip on all windsurf boards
- Aerosol application
- Easy use
For a more durable and course finish use Nautix Epoxy Non-Slip
|
